Decapative and Oxide converter Ruginox 250ml

Decapative and Oxide converter Ruginox 250ml.

• DISSOLVE THE OXIDE: Apply Ruginox on the rusty surface (in situations of stratified oxide it will be necessary to intervene before with a scratch). Wait about 2 minutes and then proceed to remove dissolved waste, rinse and dry.

• CONVERTIR THE OXIDO IN METAL: Apply a discreet amount of Ruginox on the rusty surface (in situations of particularly important layers of oxide, it will be necessary to intervene before with a scratch. After waiting 20 minutes, the conversion will begin.

RUGINOX has a high performance: with 1 liter of product is managed to treat a surface of about 20m2. It is a product intended for both professional and particular use. 

- Ensure that for at least 3 hours the treated surface is left at water or rain.

- Expect the complete phase of metal oxide transformation, which is normally obtained between 12 and 24 hours.

- After the treatment and transformation of the oxide into metal, the surface will be presented in opaque white color, and it will be enough to remove the excess of product with an abundant rinse of clean water, which will evidence a surface completely transformed into metal and exempt from oxide.

- Then and according to the need, you can go to the painting operation by making sure the surface is perfectly clean and dry.

WHERE'S IT?

• Carroceros
• Building quarries
• Repair of boats
• Various maintenance
• House, fences, doors, bars, bars, etc...

SK ETB73525ORO1 A