*Offer not combinable with other promotions and for a limited time.
*Offer valid only on our website for orders for Peninsula, Balearic Islands and Portugal.
The CAMPKO gas cylinder holder is suitable for mounting conventional interchangeable gas cylinders, aluminum gas cylinders and CAMPKO gas cylinders. The gas cylinder holder is predestined for permanent mounting of gas cylinders in motorhomes, camper vans or caravans, but can also be used for industrial purposes or for securing gas cylinders in the leisure sector.
The mounting plate and tensioning straps are made of high-quality stainless steel. The tensioning straps are also rubber coated.
The tensioning straps are opened and closed by means of two hexagon socket screws for quick removal of the gas cylinder at any time.
For permanent installation in the motor home, the gas bottle holder is screwed securely to the rear or side wall of the gas cabinet. For greater stability, we recommend fixing it to the vehicle body or using a counter plate (112652) on the rear wall of the gas cylinder compartment.
Product description: The CAMPKO gas cylinder holder has been specially developed for the safe attachment of refillable gas cylinders in vehicles or stationary gas stores. The product is compliant with UN Regulation No. 67 and ensures safe use when installed correctly.
Scope of application: The gas cylinder holder is intended for use in vehicles or stationary areas to securely fix gas cylinders and facilitate transportation.
WARNING: Failure to follow the safety instructions may result in serious injury or damage to property.
Installation should only be carried out by qualified personnel.
Use only the fasteners included in the scope of delivery.
Ensure that the bracket is firmly attached to the vehicle frame or a suitable surface.
Check the seals and the correct attachment of the gas cylinder before each use.
Always store gas cylinders in well-ventilated areas.
Protect the holder and the gas cylinder from extreme temperatures and direct sunlight.
Do not use the holder for damaged or unauthorized gas cylinders.
Tools required
13 mm socket wrench
6 mm Allen wrench
Drill with 10 mm drill bit
Installation steps:
Determine the position of the gas cylinder in the gas store or in the vehicle.
Mark the 4 fixing points with the bracket.
Drill the marked points with a 10 mm drill bit.
Fix the front plate of the bracket with the nuts and bolts supplied.
Pass the straps through the openings provided in the bracket and secure them firmly.
Place the gas cylinder in the bracket and secure it with the straps.
Maintenance and inspection:
Periodically check the fasteners and straps for tightness and wear.
Make sure that there is no corrosion on the metal parts.
Clean the bracket regularly to remove dirt or deposits.
Technical data:
Material: Stainless steel
Compatibility: Refillable gas tank bottles
Compliance: The CAMPKO gas bottle holder complies with the requirements of UN Regulation No. 67.
You might also like
