Motion detector from 5 to 25v. Adjustable

Motion sensor, used in automatic motion lighting

Device that allows detecting human movement by detecting infrared rays emitted by the human body. Input voltage is 5 to 25 VDC, and the output voltage is equal to the input voltage. High sensitivity, easy installation.

Widely used in motion activated lighting, LED strips, security system, automatic sensory device and more.

Specifications :
Operating voltage DC 5V ~ 25V
Output voltage equal to input voltage
Charge current <3A
Delay time: Adjustable from 2 to 360 seconds. Default setting 15 seconds
Adjustable brightness: 10 to 30 lux
110 degree detection angle, 5 to 7 meters maximum range
Size 48*25*14mm

Functions and features:

1. When a person enters the field of view of the detector, it will send the same voltage from the input to the output. After the adjustable delay time, the output will go to 0 Volts.
If the detector detects motion again within the delay time you have set, it will reset and start a new delay time.

2. Light sensor control function: It will activate only in the dark when the light environment is lower than the setting (10 to 30 lux), otherwise it will not activate even when detecting motion.

Note
1. Do not expose to direct sunlight or lighting, wind or heat exposure
2. The detector does not detect movement behind glass.
3. Do not install in vibration environments.
4. The Sensor requires a "warm-up time" to work properly, about 10s to 1min, it will depend on the delay time; During this time, the sensor is not stable, after one minute, it will be ready to work normally.
5. Left-right detection sensitivity is better than up-down, please make sure the direction of movement is from left to right.