Regulador solar Sun Control MPPT 12V 20A 300W

Solar regulator Sun Control MPPT 12V 20A 300W

Charge regulator for solar modules designed and manufactured entirely by NDS.

Depending on the model, it can manage an input power of up to 300W, with a maximum load of 20A.

The microprocessor can work with up to four charging curves, including a desulfation phase, which is very important since it guarantees longer useful life for the batteries.

Thanks to the MPPT technology, it is the point of maximum power, the measurement and the regulator that continuously compares the voltage supplied by the panel with that of the battery.

The maximum power level that the panel can emit to the battery and is capable of receiving is calculated.

From this value, the most appropriate voltage is determined to send the maximum amperage to the battery.

The MPPT regulator is the one that permanently controls the battery voltage.

In such a way that this regulator always works at the Maximum Power Point of the panel, in such a way that at all times it provides the maximum Intensity that the panel is willing to supply.

This MPPT version (SC 300M) allows optimizing the energy that comes from the solar panels, improving its efficiency by up to 20%.

Principal functions:

• Load curves in 4 phases
• Integrated desulfator
• Special output for the motor battery
• MPPT system
• Battery type selector (acid terminal, gel and AGM)
• Input for two photovoltaic modules
• LED charging indicator
• Input voltage up to 300W

Technical data:

-Charging current 20 A
-Max voltage 145V
-Rated voltage 12V

-Dimensions: Length x width x depth: 123x108x50

-Colour: Black.