Pump + Pressure switch ESPA Prisma 25 5M 1.5CV Single-phase

ESPA Prisma 25 5M 1.5CV Single-Phase Pump

Monobloc multistage centrifugal electric pumps in horizontal execution designed for the pressurization of domestic homes, small irrigation systems and clean water pumping applications where a robust and compact pump is required.

Especially recommended for applications with drinking water.

It stands out for its extremely quiet operation and its self-priming capacity up to 2 m, which is considerably increased by installing a foot valve.

Its reliability is added to its ability to work in multiple conditions, and its compatibility stands out by incorporating an ESD variable speed control module to automate its operation with criteria of energy savings and installation efficiency. In particular, it is recommended for pressurization at constant pressure.

Single phase.

Number of motor poles: 2

Number of drivers: 5

Maximum height: 56.2 mca

Pressure range: 53-20 bar

Maximum working pressure: 12 bar

Dimensions : 56cm x 26cm x21cm

Weight: 16.3

Baico pressure switch

Automatic water group that, mounted on a pump, supplies constant pressure

Electronic disconnection device when the pump works without water and prevents water hammer. It does not require maintenance or air preload. Completely silent.

Check valve, pressure gauge, pressure switch and electronic control circuit. With built-in reset button.

Designed for automatic water supply in homes. Also prepared to work with waters slightly loaded with sand.

The main body, upper support and cable gland are made of technopolymer. The inner membrane is made of natural rubber. The screws are made of AISI 304 stainless steel.

Pressure switch characteristics:

Voltage: 220V-240V 110V-120V
Frequency: 50/60Hz
Max.current: 10A
Max.power: 1.1KW、1.5KW
Starting pressure setting: 1.2 bar、1.5bar、2.2bar
Max.working pressure: 10bar
Thread connection: 1＂
Waterproof protection: IP65