*Offer not combinable with other promotions and for a limited time.
*Offer valid only on our website for orders for Peninsula, Balearic Islands and Portugal.
Dekasyl MS-5 is a high-quality high-performance adhesive with high initial strength that can be used in all areas of vehicle construction.
The areas of use and application are diverse and can be expanded as required.
Color: white
Contents: 290 ml
Packaging: Cartridge
Correct application:
Dekasyl MS-5 can be easily applied with a hand or pressurized air gun. For sealing, Dekasyl MS-5 should be applied within 12 minutes (at 20°C/50 % relative humidity) with a cloth previously dampened in a mild soap solution.
Dekasyl MS-5 should be processed or smoothed with a putty knife or putty knife previously dipped in a mild soap solution.
Avoid penetration of the side solution between the joint faces and the sealant, as this leads to a loss of adhesion.
this leads to a loss of adhesive strength. For adhesion, the substrates must dry within 15 minutes (at
20°C/50% relative humidity) after application of Dekasyl MS-5. The higher the temperature
the shorter the processing time. In general, a 2 mm adhesive layer is recommended if similar materials (with similar strength) are to be processed
materials (with similar strength) are to be bonded. The greater the difference in thermal expansion, the thicker the adhesive layer should be. At a temperature of 20°C and a relative humidity of 50%, Dekasyl MS-5 can be applied with most industrial paints after only 10 minutes.
Technical data:
Base material: MS polymer
Curing/Sealing: Moisture
Specific gravity: approx. 1.4 kg/liter
Skin formation time (20°C/50% rel. LF): approx. 12 min
Open time (20°C/50% rel. LF): < 15 minutes
Curing time after 24 h (20°C/50% rel. LH): approx. 4 m
Temperature resistance: -40°C to +120°C (-40°F to +120°F)
Application temperature: +5°C to +35°C (+5°C to +35°C)
Resistance to UV rays and weathering: excellent
You might also like
